平臺授權一級代理,咨詢微信:jinshanbio
NALGENE聚四氟乙烯離心瓶3127-0250
簡要描述:NALGENE聚四氟乙烯離心瓶3127-0250,材質Teflon*FEP。是低速離心處理腐蝕性化學品的理想選擇。是提取類脂物和苯酚、消化、沉淀的選擇。對大多數酸堿和有機溶劑有*的耐化學性。可高溫高壓滅菌,可經受溫度范圍從-100℃至150℃。使用NALGENE密封蓋裝置(貨號DS3131-0038)后可以Z高推薦轉速4000g運行。在進行高溫高壓操作之前,請將蓋放置在瓶的頂部。
NALGENE聚四氟乙烯離心瓶3127-0250NALGENE聚四氟乙烯離心瓶3127-0250描述:材質Teflon*FEP。是低速離心處理腐蝕性化學品的理想選擇。是提取類脂物和苯酚、消化、沉淀的選擇。對大多數酸堿和有機溶劑有*的耐化學性。可高溫高壓滅菌,可經受溫度范圍從-100℃至150℃。使用NALGENE密封蓋裝置(貨號DS3131-0038)后可以zui高推薦轉速4000g運行。如在Sorvall GSA轉子中采用該離心瓶,請加裝NALGENE離心瓶接頭(貨號為DS3125-0250).在進行高溫高壓操作之前,請將蓋放置在瓶的頂部,但不要按螺紋旋轉密封。注意:該FEP離心瓶只有100%滿裝填充才可正常工作。訂購信息:
貨號 | | 3127-0250 |
|
標稱容量, ml | | 250 |
每盒數量 | | 1 |
每箱數量 | | 6 |
Materials:
Teflon* FEPTefzel* ETFE Screw Closure
Ideal bottle for low-speed centrifugation of aggressive chemicals. Excellent for large-volume lipid and phenol extractions, digestions and precipitations. Resists most acids, bases and organic solvents. Autoclavable bottle rated for temperatures from -100? to +150癈. Use NALGENE sealing cap assembly (Cat. No. DS3131-0038) to run this bottle at maximum recommended speed (4,000 x g). When using this bottle in the Sorvall GSA rotor use the NALGENE centrifuge bottle adapter (Cat. No. DS3125-0250). Before autoclaving, just set closure on top of the bottle without engaging the threads. NOTE: FEP centrifuge bottle must be filled to 100% of the total capacity for proper performance.

授權一級代理請認準金山科研平臺,產品價格和貨期請咨詢微信:jinshanbio
,詢價請加微信:jinshanbio
?
Bio-Rad伯樂官網 |伯樂授權代理 |伯樂ddPCR| 伯樂Aminex| 伯樂層析填料色譜柱是專業的授權總代理區域代理經銷平臺。
? 如需詢價,請加客服QQ:1749072012 、客服微信:jinshanbio,或發送郵件到1749072012@qq.com
? 平臺為生命科學研究相關領域提供一站式耗材試劑儀器解決方案和采購服務,數據資源基于CC協議。
? 本文地址:
http://www.gamefang.cn/thread-51640.htm
特別聲明:以上內容(如有圖片亦包括在內)來源于授權廠家或網絡,如有侵權,請聯系客服刪除,本平臺不提供信息校正和存儲服務。
Notice: The content above (including the pictures if any)comes from authorized manufacturers or networks. In case of infringement, please contact to delete it. This platform does not provide information storage services.