whatman囊式組織培養溶液過濾器 的詳細介紹Whatman Polycap一囊式組織培養溶液過濾器可以安全而有效地過濾要求嚴格的生物溶液和組織培養溶液。whatman囊式組織培養溶液過濾器特性：·具有低蛋白吸附膜·高效預濾·預先滅菌·不要求任何昂貴的設備·比常規方法降低了噴濺和泄露的危險·可用一個濾器作為另一個濾器的預濾裝置·可將樣品直接過濾到常壓容器中
Polycap? TC (PES) is available with and without a filling bell, they aredisposable, dual layer polyethersulfone (PES) membrane filtration capsules thatprovide efficient filtration for critical aqueous solutions.The PES membrane is inherently hydrophilic, has low extractables, is biosafe,has excellent flow rates and exhibits low protein binding.Features and benefits Polycap TC/PES 0.2/0.1, 0.2/0.2 and 0.8/0.2 μm capsules pass the HIMA Challenge Test for Sterilizing Grade Filters 100% integrity-tested during manufacturing; results are correlated to microbial retention Housing thermally fused (no surfactants or mold releasing agents) Integrity-testable by bubble point, pressure decay or forward flow methods Available in sterile and nonsterile versions with a filling bell option Manufactured in clean room facilities under ISO Quality Systems PES membrane protein adsorption characteristics: HSA 0.4 μg/cm2 Insulin 2.0 μg/cm2 Gammaglobulin 1.5 μg/cm2
Applications Aqueous solutions Biologicals Buffers Cleaning/rinsing solutions Enzymes High-quality water Particle counting solutions Pharmaceutical solutions Reagent preparation Salt solutions Tissue culture media Virus suspensions Technical Properties - Polycap TC HousingPolypropylene VentOn inlet MembranePolyethersulfone (PES) Support systemPolypropylene SealingHeat-fused Maximum pressure4.1 bar (60 psi) Flow directionIf there is a prefilter, it is located on the inlet side and flow should follow arrows Endotoxin levelLAL tested, ≤ 0.5 EU/ml BiosafetyMaterials pass USP Class VI SterilizationCertain filter devices have been sterilized.* Capsule may be autoclaved at 121°C for 20 minutes (maximum 132°C). However, an integrity test should be performed after autoclaving. (*sterile and non-sterile options offered) Filtration area36 mm capsule: 440 cm2 (72 in2) 75 mm capsule: 930 cm2 (144 in2) 150 mm capsule: 1900 cm2 (302 in2) Water bubble point (final membrane)0.1 μm > 3.2 bar (46 psi) 0.2 μm > 2.7 bar (40 psi) 0.45 μm > 2.1 bar (30 psi) 1.0 μm > 1.1 bar (16 psi) SB - Stepped barb for 6 to 10 mm (1/4 to 3/8") tubing 1/2 SB - Stepped barb for 10 to 12 mm (3/8 to 1/2") tubing MNPT - Male national pipe thread HB - Hose barb
Ordering Information - Polycap TC Catalog NumberDescription 6714-3601Polycap TC 36, 0.2/0.1 μm, sterile, with SB inlet and outlet,1/pk 6714-3602Polycap TC 36, 0.2/0.2 μm, sterile, with SB inlet and out,1/pk 6717-3602Polycap TC 36, 0.2/0.2 μm, sterile, with 1/2 SB inlet and outlet, 1/pk 2622NSPolycap TC 36, 0.2/0.2 μm, with HB inlet and SB outlet, 5/pk 6714-3604Polycap TC 36, 0.65/0.45 μm, sterile, with SB inlet and out, 1/pk 6715-3601Polycap TC 36, 0.2/0.1 μm, sterile, with SB inlet and outlet plus filling bell, 1/pk 6715-3602Polycap TC 36, 0.2/0.2 μm, sterile, with SB inlet and outlet plus filling bell, 1/pk 6716-3612Polycap TC 36, 0.2/0.2 μm, with 1/2 SB inlet and SB outlet plus filling bell, 1/pk 6716-3602Polycap TC 36, 0.2/0.2 μm, with MNPT inlet and SB outlet plus filling bell, 1/pk 6715-3604Polycap TC 36, 0.65/0.45 μm, sterile, with SB inlet and outlet plus filling bell, 1/pk 6715-3682Polycap TC 36, 0.8/0.2 μm, sterile, with SB inlet and outlet plus filling bell, 1/pk 6714-7501Polycap TC 75, 0.2/0.1 μm, sterile, with SB inlet and outlet,1/pk 6714-7502Polycap TC 75, 0.2/0.2 μm, sterile, with SB inlet and outlet,1/pk 2742CPolycap TC 75, 0.2/0.2 μm, sterile, with 1/2 SB inlet and outlet,5/pk 2742MPolycap TC 75, 0.2 μm, with MNPT inlet and outlet, 5/pk 6717-7504Polycap TC 75, 0.65/0.45 μm, sterile, with 1/2 SB inlet and outlet, 1/pk 6714-7504Polycap TC 75, 0.65/0.45 μm, sterile, with SB inlet and outlet, 1/pk 6717-7510Polycap TC 75, 1.0/1.0 μm, sterile, with 1/2 SB inlet and outlet, 1/pk 6715-7501Polycap TC 75, 0.2/0.1 μm, sterile, with SB inlet and outlet plus filling bell, 1/pk 6715-7502Polycap TC 75, 0.2/0.2 μm, sterile, with SB inlet and outlet plus filling bell, 1/pk 6716-7502Polycap TC 75, 0.2/0.2 μm, sterile, with MNPT inlet and SB outlet plus filling bell, 1/pk 6718-7504Polycap TC 75, 0.65/0.45 μm, with 1/2 SB inlet and SB outlet plus filling bell, 1/pk 6715-7582Polycap TC 75, 0.8/0.2 μm, sterile, with SB inlet and outlet plus filling bell, 1/pk 6717-9501Polycap TC 150, 0.2/0.1 μm, sterile, with 1/2 SB inlet and outlet, 1/pk 6717-9502Polycap TC 150, 0.2/0.2 μm, sterile, with 1/2 SB inlet and outlet, 1/pk 6704-9502Polycap TC 150, 0.2/0.2 μm, with 1 1/2" sanitary inlet and outlet, 1/pk 6717-9504Polycap TC 150, 0.65/0.45 μm, sterile, with 1/2 SB inlet and outlet, 1/pk 6717-9510Polycap TC 150, 1.0/1.0 μm, sterile, with 1/2 SB inlet and outlet, 1/pk 6718-9502Polycap TC 150, 0.2/0.2 μm, sterile, with 1/2 SB inlet and outlet plus filling bell, 1/pk 6718-9582Polycap TC 150, 0.8/0.2 μm, sterile, with 1/2 SB inlet and outlet
whatman濾膜層析產品一級代 理(二)
WHATMAN薄層層析板TLC WHATMAN尼龍膜 WHATMAN空氣檢測用濾膜PM2.5 PM10 3MM色譜紙31ET色譜紙3MM濾紙 WHATMAN囊式過濾器 WHATMAN硝酸纖維素膜NC膜 WHATMAN PVDF膜 WHATMAN PURADISC25針頭式過濾器 WHATMAN盤式過濾器 WHATMAN基因組純化試劑盒 FTA卡 全不銹鋼真空過濾器 Partisil HPLC Columns 色譜柱
?
Bio-Rad伯樂官網 |伯樂授權代理 |伯樂ddPCR| 伯樂Aminex| 伯樂層析填料色譜柱是專業的授權總代理區域代理經銷平臺。
? 如需詢價，請加客服QQ：1749072012 、客服微信：jinshanbio，或發送郵件到1749072012@qq.com
? 平臺為生命科學研究相關領域提供一站式耗材試劑儀器解決方案和采購服務，數據資源基于CC協議。
? 本文地址：
http://www.gamefang.cn/thread-38902.htm
QQ:1749072012